What it is
Metal-parts packaging balances corrosion, surface, edge, mass and part-to-part contact requirements with the downstream production process.
When it is relevant
Relevant for machined parts, stampings, castings, fasteners, coils and assemblies supplied to production, service or export locations.
Risks and problems addressed
Rust, staining, burr damage, denting, nesting, oil transfer and mixed-metal contact can create rejects or disrupt automated feeding.
Product characteristics that matter
State alloy, surface treatment, cleanliness, residual oil, sharp edges, tolerances, cosmetic zones, magnetic properties and automatic orientation needs.
Logistics and environmental factors
Capture sea exposure, storage duration, reusable-loop contamination, line-side presentation, return transport and the number of handling cycles.
Information a packaging supplier needs
Provide part drawings, mass, material and finish, cleanliness and corrosion duration, pack orientation, quantities, line interface and defect criteria.
Common mistakes
Do not ignore residual process chemistry, allow sharp parts to puncture barriers, or optimize pack density at the expense of part separation.
Relevant standards and regulations
Select any standard from the actual product, route and verification objective. Consult the current official publication; summaries do not replace a standard or engineering validation.
RFQ
What a useful specification contains
Provide part drawings, mass, material and finish, cleanliness and corrosion duration, pack orientation, quantities, line interface and defect criteria.
Frequently asked questions
How do I know whether metal-parts packaging requirements is relevant?
Relevant for machined parts, stampings, castings, fasteners, coils and assemblies supplied to production, service or export locations.
What should I give a packaging supplier?
Provide part drawings, mass, material and finish, cleanliness and corrosion duration, pack orientation, quantities, line interface and defect criteria.
Does PackNavi choose a packaging technology here?
No. PackNavi captures conditions, required outcomes and open points. A suitable technology must be engineered and validated for the actual product and supply chain.
Sources and references
Primary and official sources are preferred. Always check the current source before acting.
- ISO/TC 122 — PackagingISO
- Committee D10 on PackagingASTM International